| Sign In | Join Free | My burrillandco.com |
|
Jiangsu Shengman Drying Equipment Engineering Co., Ltd
5 Years
| Ask Lasest Price | |
| Brand Name : | Xin ShengMan |
| Model Number : | LPG-5/10/100 |
| Certification : | CE and ISO9001 |
| Price : | USD10000-USD300000 |
| Payment Terms : | L/C, T/T, Western Union |
| Supply Ability : | 10sets/Month |
| Delivery Time : | 60-90days |
2L Lab Spray Dryer Machine / Mini Spray Dryer Spray Drying Equipment for Sale
Descriptions
After fresh air is filtered and heated, it enters into the air
distributor which on the top of the drier. The hot air in spiral
form equably enters into the drying room.When liquid raw material
are passed through the high-speed centrifugal sprayer on the top of
the tower, it will be rotated and sprayed into the extreme slim
mist liquid beads.
Raw material can be dried to the final products instantly while it contact with the heatedair.Finished products are discharged continuously from bottom of the drying tower and cyclones segregator. Wasted air is discharged from blower.
Features
For the LPG series high speed centrifugal spray dryer, it consists
of of liquid delivery, air filtering and heating, liquid atomizing,
drying chamber, air exhausting and material collecting, control
system and so on, the feature for each system as bellow:
１.The liquid delivery system consists of liquid tank, magnetic
filter, pump and so on as to ensure the liquid enter into the
atomizer smoothly.
２.Air filtering system and heating system
Before the fresh air enter into the heater, it should pass through
the Pre&post filter first, and then enter the heater for
heating. For the heating method, there are electrical heater steam
radiator, gas furnace and so on. Which method to choose depends on
the customer site conditions.To ensure the drying medium enter into
the drying chamber with high purity, the heated air should go
through the High efficiency filter before enters the drying
chamber.
3. Atomizing system
The atomizing system consists of high speed centrifugal atomizer
with inverter and so on.
The powder from the high speed centrifugal atomizer is between
40-120 microns.
4. Drying Chamber system
The drying chamber consists of the spiral shell, hot air
distributor, main tower and relevant fittings.
The Spiral shell and hot air distributor: the spiral shell and hot
air distributor at the air inlet of the tower top can regulate air
flow rotation angle according to the specific condition, guide the
air flow inside the tower effectively and avoid the material stick
on the wall.in the middle there is the position for installing the
atomizer.
Drying tower: The inner wall is SUS mirror sheet, ad welded by the
arc welding. The insulation is rock wool.
The tower is manhole and view port as to convenient to clean and
maintain the tower. For the Tower body cross interface, pipe elbow
are arc butt design, reduce dead angle; sealed type.
The main tower is equipped with air hammer, controlled by the
pulse, and hitting the main drying tower timely as to avoid the
dust stick on the wall
5. Air exhausting and product collecting system
For the material collecting system, there are several types. Such
as cyclone, cyclone+bag filter, bag filter, cyclone +water scrubber
and so on. The method is depending on the material property itself.
For the filtering system for the outlet air, we have filter on
request.
6. Control system
HMI+PLC, each parameter can be displayed on the screen. Every
parameter can be controlled and recorded easily.
Centrifugal spray atomizer Features
1.The drying speed is high when the material liquid is atomized,the
surface area of the material will increase greatly.In the hot-air
flow,95%-98% of water can be evaporated at a moment.The time of
completing the drying is only several seconds. This is especially
suitable for drying the heat sensitive materials.
2.Its final products own the good uniformity, flow ability &
solubility. And the final products are high in purity and good in
quality.
3.The production procedures are simple and the operation and
control are easy.The liquid with moisture contents of 40-60%(for
special materials,the contents might be up to 90%).can be dried
into the powder or particle products once a time. After the drying
process, there is no need for smashing and sorting,so as to reduce
the operation procedures in the production and to enhance the
product purity.The product particle diameters,looseness and water
contents can be adjusted through changing the operation condition
within a certain range. It is very convenient to carry out control
and managment.
Technical parameters
| Model | PLG | |||||
| 5 | 25 | 50 | 100 | 150 | 200-2000 | |
| inlet temperatyre ℃ | 140-350 automatically controlled | |||||
| outlet temperatyre ℃ | 80-90 | |||||
| Max water evaporation capacity kg/h | 5 | 25 | 50 | 100 | 150 | 200-2000 |
| centrifugal spraying nozzle transmission mode | compressed air transmission | mechaical transmission | ||||
| rotation speed (r.p.m) | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
| spraying desc diameter (mm) | 50 | 100 | 120 | 140 | 150 | 180-340 |
| max electric heating power (kw) | 9 | 36 | 63 | 81 | 99 | settled by customer |
| overall dimensions | 1.8*0.93*2.2 | 3*2.7*4.26 | 3.7*3.2*5.1 | 4.6*4.2*6 | 5.5*4.5*7 | depends on tryer |
| dried powder collection | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
Applications
Chemical industry
Sodium fluoride (pqtassium), alkaline dyestuff and pigment, dyestuff intermediate, compound fertilizer, formic silicic acid, catalyst, sulphuric acid agent, amino acid, white carbon and so on.
Plastics and resin
AB, ABS emulsion, uric acid resin, phenolic aldehyde resin, urea-formaldehyde resin, formaldehyde resin, polythene, poly chloroprene, etc.
Food industry
Fatty milk powder, protein, cocoa milk powder, substitute milk powder, egg white (yolk), food and plant, oats, chicken juice, coffee, instant sissoluble tea, seasoning meat, protein, soybean, peanut protein, hydrolysate and so forth.
FAQ
Q: How can I visit your factory?
A: Our company is in Changzhou city, and it is very near Shanghai
city. It takes about 1 hour to get to Changchou. Or we can even
visit you in Shnghai.
Q: What’s the quality of your products?
A: Our products come with best quality, and passed CE
certification. And exported to lots countries around the world,
such as Australia, Malaysia, Vietnam, Philippines, Korea, Brazil,
Argentina, Russia, South Africa, etc. You can rest assured with the
quality absolutely.
Q: What to do if the machine has a problem?
A: 24 hours timely response of mail and phone calls. If the parts
broken belong to non-artificial factors within 12 months, we offer
free replacement. If beyond 12 months, customers should bear the
freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: One year.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before
shipment. Other ways can also be received after we both sides
discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF,
please give us your delivery port, and we will give you CIF price.
|
|
